Clarity® Synthetic Hydraulic Oil AW | Premium Hydraulic Fluid

Clarity® Synthetic Hydraulic Oil AW 32 / 46 / 68

SYNTHETIC ASHLESS ANTI-WEAR HYDRAULIC FLUID

Clarity® Synthetic Hydraulic Oils AW are formulated with synthetic base stock and an ashless (“zinc- free”) additive system that provides exceptional oxidation stability, water separability, foam suppression, and protection against wear, rust and corrosion. They are formulated with high VI to improve hydraulic response time and increase operating temperature range. In laboratory efficiency testing, Clarity® Synthetic Hydraulic Oil AW provided up to 8% improvement in overall hydraulic pump efficiency when compared to a typical monograde hydraulic oil (lower VI product with VI<105).

*Our Product Data Sheets (PDS) contain product information including features, benefits, applications, typical key properties and service considerations. PDSs are produced regionally based on the best available information at the time of issue. For each product, there is one PDS for the Asia Pacific region. The specific information included in each PDS may not directly reflect the Australian market or Australian conditions. In the event of any inconsistency between this webpage and the applicable PDS, this webpage prevails. For the most up-to-date, Australian-specific information contact us. Please note that, by clicking the PDS link, you will be leaving the Caltex Australia website.

  • Extended oil service life
    Outstanding oxidation stability of the polyalphaolefin base fluid and inhibitor system resists oil breakdown at the elevated temperatures encountered in compressor service, helping to extend oil drain intervals beyond those achieved with conventional lubricants.
  • Protects equipment
    Polyalphaolefin base fluid helps to provide an oil film to protect highly loaded parts against wear under high temperature operating conditions, as well as during low temperature start-up. Effective inhibitor system helps provide excellent rust and corrosion protection while the anti-wear additive minimises wear under severe operating conditions.
  • Smooth operation
    Outstanding thermal and oxidation stability enables the polyalphaolefin lubricant to resist deposit formation in the heat of the compression cycle, even under severe service conditions.
  • Cetus® PAO oil is a premium performance, synthetic compressor oil based on polyalphaolefin technology. 
  • Cetus® PAO contains a rust and oxidation inhibitor system plus anti-wear additives to help provide outstanding oxidation resistance and corrosion protection. 
  • Cetus® PAO helps to minimise wear under severe operating conditions.
  • Flooded screw compressors
  • Rotary air compressors
  • Reciprocating air compressors

Not recommended for use in breathing air compressors. 

Interested in optimising your business with Caltex?



Share this page