Havoline® Fully Synthetic Manual Transmission Fluid SAE 75W-90 is a fully synthetic, high performance, highly shear stable, multigrade manual transmission fluid (MTF) specifically designed for Asian passenger car manual transmissions and transaxles. Havoline® Fully Synthetic Manual Transmission Fluid can also be used in other manual transmissions fitted to modern passenger car and light-duty commercial vehicles.

Delo® Syn-Gear XDM is a premium performance, synthetic-based, EP gear lubricant meeting API GL-5 and MT-1. It is designed to provide excellent year-round performance and protection in automotive gear applications over a very wide temperature range and under extended drain operation.

Delo® Syn-Trans XV SAE 75W- 80 is a premium synthetic, manual transmission fluid formulated specifically for Volvo iShift and Mack mDrive® automated manual transmissions.

Delo® Syn-Trans XE 75W-90 is a synthetic automated manual transmission (AMT) fluid for heavy duty trucks, specially formulated for extended drain and severe service operations, and recommended by Chevron for both factory and service fill of Eaton Ultra Shift Automated Manual Transmissions where the Eaton PS-386 specification is required. It is also formulated for use in older generation Eaton manual transmissions that require PS-164.

Delo® Syn-TDL SAE 75W-90 is a premium performance fully synthetic Total Driveline Lubricant with extended drain capability, suitable for use in both API GL 4 and API GL 5 applications, and offers good thermal stability in higher temperature operations.

Delo Syn-TDL SAE 75W-90 is formulated with fully synthetic base oils in combination with an advanced high performance additive system.

Delo® Syn-Gear XDM is a premium performance, synthetic-based, EP gear lubricant meeting API GL-5 and MT-1. It is designed to provide excellent year-round performance and protection in automotive gear applications over a very wide temperature range and under extended drain operation.

Brake and Clutch Fluid DOT 4 is a high quality, non-petroleum automotive brake fluid designed for use in conventional hydraulic brake and clutch systems under normal service conditions.

Havoline® Xtended Life Antifreeze/Coolant is a single phase, ethylene glycol antifreeze/coolant based on an aliphatic corrosion inhibitor system available as a concentrate, a premix 50/50 and a premix 55/45.

Delo® XLC Antifreeze/Coolant is a non-nitrited extended life Antifreeze/Coolant formulation for heavy duty and light duty diesel vehicles and equipment. Delo® XLC is formulated with an aliphatic corrosion inhibitor system available as a concentrate and a premix 50/50.

Delo® XLI Corrosion Inhibitor is a water based, low toxicity, environmentally friendly, nitrite free carboxylate inhibitor (OAT technology).

Delo® ELC Antifreeze/Coolant products are heavy duty engine coolants that uses organic corrosion inhibitor technology called aliphatic carboxylates. Delo® ELC is free of nitrates, borates, silicates, phosphates and amines. These products contain nitrites and molybdates for additional cylinder liner protection.

Havoline® XLI Concentrate is an environmentally sensitive, coolant and corrosion inhibitor concentrate based on extended-life organic acid Carboxylate Technology.

Techron® Concentrate Plus is a powerful fuel system treatment that helps to restore lost power and performance caused by deposit build-up in passenger cars and light duty trucks.

Techron® D Concentrate Diesel Fuel System Cleaner, is an ultra-high performance fuel system cleaner, designed for one-tank clean up and to be used in diesel passenger car (such as SUVs & PPVs) and pickup truck & mini-van engines. It will clean diesel injectors and keep them performing like new.

A shear stable, multi-viscosity super tractor oil universal (STOU) fluid. It has been designed for use in tractor engines, transmissions, final drives and hydraulic systems.

Four-Stroke Lawnmower and Stationary Engine Oil SAE 30 is a high performance, monograde engine oil intended primarily for the lubrication of gasoline engines requiring API SJ performance lubricants, and suitable for small diesel engines where API CF performance is specified.

Starplex® EP 2 is a premium, multipurpose EP automotive wheel bearing and chassis grease containing an ISO 220 mineral base oil, a lithium complex thickener, EP additives, rust and oxidation inhibitors and tackiness additives.

Multifak® EP is a multipurpose EP grease containing highly refined mineral base oils, lithium thickener, extreme pressure (EP) additives and rust and oxidation inhibitors.

Multifak® EP 2 M3 is a dark grey, multipurpose EP grease primarily designed for construction, mining and agricultural equipment where an extra measure of protection in shock loading conditions is required.

Thermatex® EP is a nonmelting, EP grease formulated from a highly refined ISO 100 mineral base oil, an organoclay (bentonite) thickener, and an effective EP agent for high temperature applications where frequent re-application is available.

Starplex HD 2 M3 is a premium, multipurpose EP grease. It contains an ISO 460 base oil, lithium complex thickener, EP additives, rust and oxidation inhibitors, tackiness additives, and molybdenum disulfide.

Starplex HD 2 M5 contains a ISO 460 base oil, litihium complex thickener, extreme pressure additives, rust and oxidation inhibitors, tackiness additives, and 5% molybdenum disulfide.

Black Pearl SRI® 2 is a specially formulated grease containing a highly refined paraffinic base oil, synthetic polyurea ashless organic thickener and high performance rust and oxidation inhibitors, for the lubrication of anti-friction ball, needle and roller bearings operating at speeds up to and above 10,000 rpm, operating at higher temperatures, or where water or salt water may penetrate bearings.

Multifak® HM 2 is an efficient performance lithium grease, formulated with ISO 110 mineral base oils, combined with oxidation and corrosion inhibitors, and anti-wear additives.

Multifak® HM 2 is a multipurpose grease suitable for a wide spectrum of applications within a given temperature range.

Ultra-Duty® HD 2 is a premium, heavy-duty EP grease containing a high viscosity mineral oil, lithium thickener, effective EP additive, rust and oxidation inhibitors and tackiness agent.

Starplex® XD 1.5 M3 is a special grease formulated for severe applications that are subject to high temperatures, extreme pressure, shock loads and water wash out conditions. Its formulated with blend of heavy synthetic base oils and a shear stable Lithium Complex Soap.

Starplex Syn HD 1.5 is a high performance, high temperature industrial and automotive EP grease specially formulated from synthetic base oil, lithium complex thickener, EP additives, a tackiness agent and special corrosion and oxidation inhibitors

Texclad® XDS 00/000 is a high performance sprayable aluminium complex grease, formulated with mineral base stocks combined with a very fine graphite component designed to promote high pressure load protection.

1000 THF is a high quality, multifunctional tractor hydraulic fluid, specially formulated for use in transmissions, final drives, wet brakes, and hydraulic systems of tractors and other equipment employing a common fluid reservoir.

Rando® HD oils are formulated with premium Group II base oils and anti-wear additives, and are designed to give robust protection to hydraulic pumps in mobile and stationary systems.

Rando® HDZ is a premium quality, shear stable, multiviscosity, anti-wear hydraulic fluid, designed to give robust protection for hydraulic systems subjected to wide variations in ambient and operating temperatures.

Rando® WM 32 is a high performance multigrade hydraulic fluid designed for use in both wind turbine systems and a wide range of other applications where optimum protection is required under severe operating conditions.

Clarity® Synthetic EA Hydraulic Oil are readily biodegradable high performance hydraulic oils that meet EPA Vessel General Permit (VGP) requirements for environmentally acceptable lubricants.

Capella® WF is a high quality, essentially wax-free oil for the lubrication of refrigeration and air conditioning compressors when refrigerants other than HFCs (hydrofluorocarbons) are used. Made from special, narrow cut naphthenic base oils with an extremely low pour point and Freon Floc point.

Cetus®DE is a premium performance, synthetic compressor oil based on diester technology and containing an ashless inhibitor system, helping to provide protection against corrosion and outstanding oxidation resistance under severe operating conditions.

Cetus® PAO oil is a premium performance, synthetic compressor oil based on polyalphaolefin technology.

Cetus® PAG is a premium performance synthetic gas compressor lubricant formulated with Polyalkylene glycol and designed for use in enclosed pattern gas compressors where the crankcase and bearings operate in a hydrocarbon or chemical gas-filled atmosphere.

Compressor Oil EP VDL is a high performance, petroleum-based compressor oil specifically designed for severe operating conditions.

Capella® HFC is a fully synthetic compressor lubricant designed with polyolester technology for use in refrigeration and air conditioning compressor systems.

Capella® HFC refrigeration oils are high performance fully synthetic fluids designed for the lubrication of compressors used in refrigeration and air conditioning systems and are blended exclusively with specially selected polyol esters (POE).

Delo®1000 Marine is a lower alkaline reserve (12 Base Number) trunk piston engine oil (TPEO).

Taro® 30 DP is a moderately high alkaline reserve (30 Base Number) trunk piston engine oil (TPEO) designed for use in high specific output mediumspeed trunk piston engines burning residual fuels (up to 4.0% sulfur).

Taro® 40 XL is a high alkaline reserve (40 Base Number) trunk piston engine oil (TPEO) designed for use in high specific output medium speed trunk piston engines burning residual fuels (up to 4.5% sulfur).

Taro® DP Series lubricants are high-performance, medium- to high-BN, diesel engine oils for medium and high-speed trunk piston diesel engines.

Taro® XL Series lubricants are high-performance, highBN, diesel engine oils for medium-speed trunk piston diesel engines fuelled by residual fuels to maximum Sulphur level of 4.5%.

Taro® Ultra is a new range of cylinder lubricants specifically designed to cope with the demands and required flexibility for IMO 2020. Taro® Ultra cylinder lubricants have been fully field tested using a wide variety of fuels expected to be available post IMO 2020 implementation and are approved by major OEMs. 

Taro® Ultra is a new range of cylinder lubricants specifically designed to cope with the demands and required flexibility for IMO 2020. Taro® Ultra cylinder lubricants have been fully field tested using a wide variety of fuels expected to be available post IMO 2020 implementation and are approved by major OEMs. 

GST® Advantage EP is formulated with VARTECH Technology which is advanced chemistry that helps:

• Improve oxidation stability
• Reduce oil degradation
• Extend oil life by limiting harmful precursors that can lead to varnish formation

VARTECH Technology inhibits varnish formation to help maintain peak performance, reliability and productivity

GST® Advantage RO is formulated with VARTECH Technology which is advanced chemistry that helps 'Improve oxidation stability', 'Reduce oil degradation', 'Extend oil life by limiting harmful precursors that can lead to varnish formation VARTECH Technology inhibits varnish formation to help maintain peak performance, reliability and productivity'.

GST® Oil is a premium performance inhibited turbine oil formulated from premium base oil technology and rust, oxidation and foam inhibitors.

HDAX® 9500 is a superior quality, high performance dispersant/detergent type gas engine oil formulated specifically for landfill gas, biogas, digester gas and sour gas applications.

HDAX® 5200 Low Ash Gas Engine Oil is a premium performance, heavy-duty, low ash crankcase oil specifically designed to lubricate a wide range of four-stroke natural gas and dual-fuel engines where low ash oils are recommended.

HDAX® 6500 LFG Gas Engine Oil is a premium quality, high performance low ash, dispersant/detergent type gas engine oil formulated especially for four stroke landfill gas, biogas, digester gas and sour gas applications.

HDAX® 9200 Low Ash Gas Engine Oil is a premium performance, heavy-duty, low ash crankcase oil specifically designed to lubricate a wide range of four-stroke natural gas and dual-fuel engines where low ash oils are recommended.

Regal® R&O is an inhibited turbine oil formulated from highly refined base stocks and rust, oxidation and foam inhibitors. (For most compressors where OEM requires an R&O circulating oil). 

ISO 32, 46, 68, 100.

Texatherm® is a proven performance highly refined, thermally stable paraffinic petroleum oil, formulated for use as an industrial heat transfer fluid for closed and open heat transfer systems with forced circulation.

Canopus® oils are highly refined paraffinic mineral oil suitable for industrial circulating systems and general purpose lubrication where straight mineral oils are acceptable.

Meropa® oils are high performance, mild EP, industrial gear lubricants formulated with a sulfurphosphorus additive system, which also provides rust and oxidation inhibition, a corrosion and oxidation inhibitor and a metal passivator.

TALCOR MILL BRASS COMPOUND is specially designed for lubrication of journal bearings in sugar mills and based on a proprietary formulation. The thickening system is based on a combination of thickeners to ensure that the compound is resistant to various chemicals in juice extracts and remains stable under severe operating conditions.

Meropa® XL gear oils are premium high-performance gear oils, offering long lubricant life, corrosion protection, excellent wear protection with high load carrying capacity and robust micropitting wear protection. They are designed for use in industrial and marine gear systems, where extreme load and shock load protection is required.

Meropa® WG oil is a premium quality, high viscosity, industrial gear oil with low carbon residue, compounded with selected fatty oils together with rustand foam inhibitors.

Meropa® EliteSyn WL are premium performance synthetic gear oils designed for use in wind turbine and other industrial gearboxes. They are formulated for long life protection against micropitting and wear under high load and shock load conditions.

TALCOR OGP-6 is an adhesive, open gear lubricant free of bitumen, graphite, molybdenum disulphide and other heavy metals. Highly refined base oils and stable synthetic thickeners compounded together with high performance enhancing additives, provides a transparent lubricant film on the gear flanks.

TALCOR OGP-4 is an advanced Open Gear Lubricant consisting of a solvent free blend of synthetic base fluids and hydro-treated mineral oils complexed with new micro ground lubricating solids and plastic-coupling chemical agents that form a thixotropic matrix.

Pinnacle® Marine Gear 220 is a fully formulated, quality synthetic gear lubricant based on a mixture of polyalphaolefins and diesters. It offers oxidation stability at elevated temperatures, extended oil drain life and good wear protection.

VARTECH™ Industrial System Cleaner (ISC) is a deposit-cleaning product added directly to the oil in use during operation to clean a system of varnish and sludge before a scheduled oil change. VARTECH™ ISC helps prepare the system for optimum performance of a new, fresh oil charge.

Transformer Oil Inhibited is a premium performance inhibited electrical insulation oil suitable for use in normal or severe operating conditions such as high ambient temperatures, where oxidation resistant and thermally stable insulating oils meeting the IEC 60296:2020 Type B transformer oil specification are required.

Transformer Oil Inhibited is formulated with highly refined inhibited naphthenic base oils and does not contain poly-chlorinated biphenyls (PCBs).

Aquatex® 3180 oil is a general purpose soluble oil formulated with special base oils, coupling agents and a high level of emulsifiers.

Way Lubricant X 320 is an efficient performance machine tool slideway lubricant, formulated with highly refined mineral base oils, friction modifiers, extreme pressure and anti-rust additives, with tackiness agents, and corrosion inhibitors.

Way Lubricant X 320 offers good demulsibility properties for rapid separation from coolants, reducing the possibility of bacteria growth due to oil contamination.

Way Lubricant X is a high quality, machine tool slideway lubricant.

TALCOR BREAKOUT BLUE is an anti-seize compound with a distinctive blue colour with its revolutionary technology, consisting of the new generation of stable antiweld fillers, highly refined, high viscosity base stocks bound with a high melt complex thickener.

Transformer Oil Uninhibited is a premium performance uninhibited electrical insulating oil, suitable for use where insulating oils meeting IEC 60296:2020 Type B transformer oil specifications are required.

It is formulated with highly refined naphthenic base oil and does not contain polychlorinated biphenyls (PCBs).

Chain & Bar Oil is a tough, tacky lubricant designed for lubrication of the chain, bar and sprocket on all types of chainsaws and chain driven machinery. It is made from highly refined high viscosity index base oils along with a highly effective tackiness agent to resist throw-off.

Aries ® is a high performance lubricant for percussion-type air tools, which is formulated from highly refined mineral oils, extreme pressure, oiliness and tackiness additives, emulsifiers, rust and corrosion inhibitors, and anti-foam and anti-fogging agents.