AUTOMOTIVE TRANSMISSION & AXLE OILS
Delo® Syn-Trans XE SAE 75W-90
Delo® Syn-Trans XE 75W-90 is a synthetic automated manual transmission (AMT) fluid for heavy duty trucks, specially formulated for extended drain and severe service operations, and recommended by Chevron for both factory and service fill of Eaton Ultra Shift Automated Manual Transmissions where the Eaton PS-386 specification is required. It is also formulated for use in older generation Eaton manual transmissions that require PS-164.
*Our Product Data Sheets (PDS) contain product information including features, benefits, applications, typical key properties and service considerations. PDSs are produced regionally based on the best available information at the time of issue. For each product, there is one PDS for the Asia Pacific region. The specific information included in each PDS may not directly reflect the Australian market or Australian conditions. In the event of any inconsistency between this webpage and the applicable PDS, this webpage prevails. For the most up-to-date, Australian-specific information contact us. Please note that, by clicking the PDS link, you will be leaving the Caltex Australia website.
**Disclaimer: The actual product may vary from the images shown on this website.
*Our Product Data Sheets (PDS) contain product information including features, benefits, applications, typical key properties and service considerations. PDSs are produced regionally based on the best available information at the time of issue. For each product, there is one PDS for the Asia Pacific region. The specific information included in each PDS may not directly reflect the Australian market or Australian conditions. In the event of any inconsistency between this webpage and the applicable PDS, this webpage prevails. For the most up-to-date, Australian-specific information contact us. Please note that, by clicking the PDS link, you will be leaving the Caltex Australia website.
**Disclaimer: The actual product may vary from the images shown on this website.
Benefits
Features
Applications
- Extended drain capabilities
Provides on-highway drain intervals of 800,000 km in on- highway Eaton medium and heavy duty transmissions, including automated manual transmissions (AMT), and 800,000 km for older model Eaton Heavy Duty Manual Transmissions - Extreme pressure protection
Protects against transmission gear scuffing, pitting and adhesive wear, even at this lower viscosity level, allowing for excellent parts protection. - Superb thermal and oxidation stability
Formulated for high temperature performance and excellent oxidation resistance to protect against sludge, varnish, lacquer and harmful deposit buildup in critical transmission components. - High viscosity index and low pour point
Excellent low temperature performance allowing for rapid circulation of the fluid for easier start up and reduced stress on the transmission components. - Wide seal compatability
Compatible with a wide range of seal elastomers helping to prevent seal deterioration and fluid loss. - Excellent shear stability
Robust viscosity retention, which contributes to system protection throughout the fluid’s service life. - Fuel economy performance
Provides up to 2% fuel economy savings, compared to higher viscosity full synthetic SAE 50 transmission lubricants (PS 164, rev 7 type fluids), to help minimise vehicle operating costs.
- Extended drain capabilities
Provides on-highway drain intervals of 800,000 km in on- highway Eaton medium and heavy duty transmissions, including automated manual transmissions (AMT), and 800,000 km for older model Eaton Heavy Duty Manual Transmissions - Extreme pressure protection
Protects against transmission gear scuffing, pitting and adhesive wear, even at this lower viscosity level, allowing for excellent parts protection. - Superb thermal and oxidation stability
Formulated for high temperature performance and excellent oxidation resistance to protect against sludge, varnish, lacquer and harmful deposit buildup in critical transmission components. - High viscosity index and low pour point
Excellent low temperature performance allowing for rapid circulation of the fluid for easier start up and reduced stress on the transmission components. - Wide seal compatability
Compatible with a wide range of seal elastomers helping to prevent seal deterioration and fluid loss. - Excellent shear stability
Robust viscosity retention, which contributes to system protection throughout the fluid’s service life. - Fuel economy performance
Provides up to 2% fuel economy savings, compared to higher viscosity full synthetic SAE 50 transmission lubricants (PS 164, rev 7 type fluids), to help minimise vehicle operating costs.
- Delo® Syn-Trans XE is a heavy duty truck synthetic automated manual transmission (AMT) fluid specially formulated for extended drain and severe service operations, and recommended for both factory and service fill of Eaton Ultra Shift Automated Manual Transmissions utilised by the main North American Truck Manufacturers when coupled with Cummins, PACCAR MX or Navistar diesel engines.
- Delo® Syn-Trans XE SAE 75W-90 is a premium, heavy duty transmission fluid engineered to provide excellent fluid shear stability and superb frictional characteristics to promote smooth, easy shifting. The high performance additives allow for excellent resistance to rust and corrossion, and are compatible with various types of ferrous and yellow metals.Delo® Syn-Trans XV SAE 75W-80 is a premium synthetic, manual transmission fluid formulated specifically for Volvo iShift and Mack mDrive automated manual transmissions.
- Delo® Syn-Trans XE is a heavy duty truck synthetic automated manual transmission (AMT) fluid specially formulated for extended drain and severe service operations, and recommended for both factory and service fill of Eaton Ultra Shift Automated Manual Transmissions utilised by the main North American Truck Manufacturers when coupled with Cummins, PACCAR MX or Navistar diesel engines.
- Delo® Syn-Trans XE SAE 75W-90 is a premium, heavy duty transmission fluid engineered to provide excellent fluid shear stability and superb frictional characteristics to promote smooth, easy shifting. The high performance additives allow for excellent resistance to rust and corrossion, and are compatible with various types of ferrous and yellow metals.Delo® Syn-Trans XV SAE 75W-80 is a premium synthetic, manual transmission fluid formulated specifically for Volvo iShift and Mack mDrive automated manual transmissions.
- Delo Syn-Trans XE SAE 75W-90 is recommended for factory and service fill for Eaton heavy duty on-road automated manual transmissions when operating under severe conditions and in extremely cold or hot environments. It has also been formulated for use in older generation Eaton manual transmissions that require PS-164, rev 7 performance to allow for consolidated use at truck workshops.
- Delo Syn-Trans XE SAE 75W-90 should not be used in axles as it is designed for AMT transmissions and has friction modifiers, which do not work well in axle lubrication.
- Delo Syn-Trans XE SAE 75W-90 is recommended for factory and service fill for Eaton heavy duty on-road automated manual transmissions when operating under severe conditions and in extremely cold or hot environments. It has also been formulated for use in older generation Eaton manual transmissions that require PS-164, rev 7 performance to allow for consolidated use at truck workshops.
- Delo Syn-Trans XE SAE 75W-90 should not be used in axles as it is designed for AMT transmissions and has friction modifiers, which do not work well in axle lubrication.
LOOKING FOR OTHER DIESEL CAR AND PICKUP TRUCKS LUBRICANTS?
Discover more high quality lubricants that offer dynamic protection for your vehicle.
