Capella® WF is a high quality, essentially wax-free oil for the lubrication of refrigeration and air conditioning compressors when refrigerants other than HFCs (hydrofluorocarbons) are used. Made from special, narrow cut naphthenic base oils with an extremely low pour point and Freon Floc point.

Cetus®DE is a premium performance, synthetic compressor oil based on diester technology and containing an ashless inhibitor system, helping to provide protection against corrosion and outstanding oxidation resistance under severe operating conditions.

Cetus® PAO oil is a premium performance, synthetic compressor oil based on polyalphaolefin technology.

Cetus® PAG is a premium performance synthetic gas compressor lubricant formulated with Polyalkylene glycol and designed for use in enclosed pattern gas compressors where the crankcase and bearings operate in a hydrocarbon or chemical gas-filled atmosphere.

Compressor Oil EP VDL is a high performance, petroleum-based compressor oil specifically designed for severe operating conditions.

Capella® HFC is a fully synthetic compressor lubricant designed with polyolester technology for use in refrigeration and air conditioning compressor systems.

Capella® HFC refrigeration oils are high performance fully synthetic fluids designed for the lubrication of compressors used in refrigeration and air conditioning systems and are blended exclusively with specially selected polyol esters (POE).

Starplex® EP 2 is a premium, multipurpose EP automotive wheel bearing and chassis grease containing an ISO 220 mineral base oil, a lithium complex thickener, EP additives, rust and oxidation inhibitors and tackiness additives.

Multifak® EP is a multipurpose EP grease containing highly refined mineral base oils, lithium thickener, extreme pressure (EP) additives and rust and oxidation inhibitors.

Multifak® EP 2 M3 is a dark grey, multipurpose EP grease primarily designed for construction, mining and agricultural equipment where an extra measure of protection in shock loading conditions is required.

Thermatex® EP is a nonmelting, EP grease formulated from a highly refined ISO 100 mineral base oil, an organoclay (bentonite) thickener, and an effective EP agent for high temperature applications where frequent re-application is available.

Black Pearl SRI® 2 is a specially formulated grease containing a highly refined paraffinic base oil, synthetic polyurea ashless organic thickener and high performance rust and oxidation inhibitors, for the lubrication of anti-friction ball, needle and roller bearings operating at speeds up to and above 10,000 rpm, operating at higher temperatures, or where water or salt water may penetrate bearings.

Multifak® HM 2 is an efficient performance lithium grease, formulated with ISO 110 mineral base oils, combined with oxidation and corrosion inhibitors, and anti-wear additives.

Multifak® HM 2 is a multipurpose grease suitable for a wide spectrum of applications within a given temperature range.

Ultra-Duty® HD 2 is a premium, heavy-duty EP grease containing a high viscosity mineral oil, lithium thickener, effective EP additive, rust and oxidation inhibitors and tackiness agent.

Starplex Syn HD 1.5 is a high performance, high temperature industrial and automotive EP grease specially formulated from synthetic base oil, lithium complex thickener, EP additives, a tackiness agent and special corrosion and oxidation inhibitors

Texclad® XDS 00/000 is a high performance sprayable aluminium complex grease, formulated with mineral base stocks combined with a very fine graphite component designed to promote high pressure load protection.

Delo 400 SLK SAE 15W-40 with ISOSYN Advanced Technology is a premium quality “low-SAPS” heavy-duty diesel engine oil specifically designed using the latest generation additive technology to provide outstanding protection for on and off-highway applications and lubricate a wide range of highspeed diesel engines requiring API CK-4, CJ-4, CI-4 PLUS / SM, or ACEA E9 performance lubricants operating under the most severe service conditions.

Delo® 400 MGX SAE 15W-40 is an API CJ-4 heavy duty diesel engine oil specifically formulated for on-highway and off-highway applications using either High Sulfur or Low Sulfur Diesel and can also help provide protection for newer compliant low emission diesel engines with Selective Catalytic Reduction (SCR), Diesel Particulate Filter (DPF) and Exhaust Gas Recirculation(EGR). It is fully compatible with previous diesel engine models and previous API Oil Service Categories including API CI-4 PLUS, API CI-4 and API CH-4.

Delo® 600 ADF SAE 15W-40 with OmniMax is a premium, high performance, long drain, “ultra-low-Ash”, synthetic technology engine oil. It is recommended by Chevron for Tier IV Final & 2017 greenhouse gas - compliant (GHG 17) diesel engines with lower CO2 emissions and improved fuel economy fitted with Selective Catalytic Reduction (SCR), Diesel Particulate Filter (DPF) and Exhaust Gas Recirculation (EGR) systems as well as in Euro VI and off-highway EU Stage V naturally aspirated and turbocharged four-stroke diesel engines.

Delo® Silver SAE 30 is a monograde heavy-duty diesel engine oil designed to lubricate engines requiring API CF or SF performance lubricants. The level of alkaline reserve makes it suitable for use with high sulfur fuels at appropriate oil drain intervals.

Delo® 400 RDS is a High performance synthetic- blend “low-SAPS” diesel engine oil designed to meet current ACEA requirements and more challenging OEM specifications for Euro V and VI engines, especially where Diesel Particulate Filters (DPF) are fitted.

Delo® Gold Ultra S SAE 10W-40 is a high performance synthetic heavy-duty engine oil designed to conform to current ACEA requirements and the more challenging OEM specifications, including Scania LDF3 for latest technology Euro VI diesel engines.

Delo® Gold Ultra SAE 15W-40 is a high performance, multigrade, heavy-duty diesel engine oil specifically designed to lubricate a wide range of engines requiring API CI-4 or ACEA E7 performance lubricants, including those fitted Selective Catalytic Reduction (SCR) and / or Exhaust Gas Recirculation (EGR) emission control technologies.

Delo® 400 NG with ISOSYN® Technology is a premium CNG/LNG/LPG oil formulated to deliver outstanding protection and long drain performance in a wide variety of medium and heavy duty CNG/LNG/LPG-fuelled applications.  

Delo 400 XSP SAE 5W-30 with ISOSYN Advanced Technology is a super-premium quality “low SAPS” heavy duty diesel engine oil which exceeds industry and engine manufacturers’ performance requirements. It is specifically designed to lubricate a wide range of high speed diesel engines requiring API CK-4, CJ4 PLUS / SN, or ACEA E9 performance lubricants operating under the most severe service conditions.

Delo® 400 XLE SAE 10W-30 with ISOSYN® Advanced Technology is a high-performance synthetic “low-SAPS” (sulfated ash, phosphorus and sulfur) heavy-duty diesel engine oil which meets industry and engine manufacturers’ performance requirements. It is specifically designed to lubricate a wide range of high-speed diesel engines requiring API CK-4, CJ-4, CI-4 PLUS / SN, or ACEA E6 performance lubricants operating under the most severe service conditions with potential fuel economy benefits.

Delo® 400 SLK SAE 10W-40 with ISOSYN Advanced Technology is a premium quality “low-SAPS” heavy-duty diesel engine oil specifically designed to lubricate a wide range of high-speed diesel engines requiring API CK-4, CJ4, CI-4 PLUS or ACEA E9 performance lubricants operating under severe service conditions.

Delo® 400 SLK SAE 10W-30 with ISOSYN® Advanced Technology is a premium quality “low-SAPS” heavy-duty diesel engine oil specifically designed to lubricate a wide range of high speed diesel engines requiring API CK-4, CJ-4, CI-4 PLUS or ACEA E9 performance lubricants operating under the most severe service conditions.

Rando® HD oils are formulated with premium Group II base oils and anti-wear additives, and are designed to give robust protection to hydraulic pumps in mobile and stationary systems.

Rando® HDZ is a premium quality, shear stable, multiviscosity, anti-wear hydraulic fluid, designed to give robust protection for hydraulic systems subjected to wide variations in ambient and operating temperatures.

Rando® WM 32 is a high performance multigrade hydraulic fluid designed for use in both wind turbine systems and a wide range of other applications where optimum protection is required under severe operating conditions.

Meropa® oils are high performance, mild EP, industrial gear lubricants formulated with a sulfurphosphorus additive system, which also provides rust and oxidation inhibition, a corrosion and oxidation inhibitor and a metal passivator.

TALCOR MILL BRASS COMPOUND is specially designed for lubrication of journal bearings in sugar mills and based on a proprietary formulation. The thickening system is based on a combination of thickeners to ensure that the compound is resistant to various chemicals in juice extracts and remains stable under severe operating conditions.

Meropa® XL gear oils are premium high-performance gear oils, offering long lubricant life, corrosion protection, excellent wear protection with high load carrying capacity and robust micropitting wear protection. They are designed for use in industrial and marine gear systems, where extreme load and shock load protection is required.

Meropa® WG oil is a premium quality, high viscosity, industrial gear oil with low carbon residue, compounded with selected fatty oils together with rustand foam inhibitors.

Meropa® EliteSyn WL are premium performance synthetic gear oils designed for use in wind turbine and other industrial gearboxes. They are formulated for long life protection against micropitting and wear under high load and shock load conditions.

VARTECH™ Industrial System Cleaner (ISC) is a deposit-cleaning product added directly to the oil in use during operation to clean a system of varnish and sludge before a scheduled oil change. VARTECH™ ISC helps prepare the system for optimum performance of a new, fresh oil charge.

Aquatex® 3180 oil is a general purpose soluble oil formulated with special base oils, coupling agents and a high level of emulsifiers.

Way Lubricant X 320 is an efficient performance machine tool slideway lubricant, formulated with highly refined mineral base oils, friction modifiers, extreme pressure and anti-rust additives, with tackiness agents, and corrosion inhibitors.

Way Lubricant X 320 offers good demulsibility properties for rapid separation from coolants, reducing the possibility of bacteria growth due to oil contamination.

Way Lubricant X is a high quality, machine tool slideway lubricant.

Aries ® is a high performance lubricant for percussion-type air tools, which is formulated from highly refined mineral oils, extreme pressure, oiliness and tackiness additives, emulsifiers, rust and corrosion inhibitors, and anti-foam and anti-fogging agents.

Taro® 30 DP is a moderately high alkaline reserve (30 Base Number) trunk piston engine oil (TPEO) designed for use in high specific output mediumspeed trunk piston engines burning residual fuels (up to 4.0% sulfur).

Taro® 40 XL is a high alkaline reserve (40 Base Number) trunk piston engine oil (TPEO) designed for use in high specific output medium speed trunk piston engines burning residual fuels (up to 4.5% sulfur).

Taro® DP Series lubricants are high-performance, medium- to high-BN, diesel engine oils for medium and high-speed trunk piston diesel engines.

Taro® XL Series lubricants are high-performance, highBN, diesel engine oils for medium-speed trunk piston diesel engines fuelled by residual fuels to maximum Sulphur level of 4.5%.

Taro® Ultra is a new range of cylinder lubricants specifically designed to cope with the demands and required flexibility for IMO 2020. Taro® Ultra cylinder lubricants have been fully field tested using a wide variety of fuels expected to be available post IMO 2020 implementation and are approved by major OEMs. 

Taro® Ultra is a new range of cylinder lubricants specifically designed to cope with the demands and required flexibility for IMO 2020. Taro® Ultra cylinder lubricants have been fully field tested using a wide variety of fuels expected to be available post IMO 2020 implementation and are approved by major OEMs. 

HDAX® 9500 is a superior quality, high performance dispersant/detergent type gas engine oil formulated specifically for landfill gas, biogas, digester gas and sour gas applications.

HDAX® 5200 Low Ash Gas Engine Oil is a premium performance, heavy-duty, low ash crankcase oil specifically designed to lubricate a wide range of four-stroke natural gas and dual-fuel engines where low ash oils are recommended.

HDAX® 6500 LFG Gas Engine Oil is a premium quality, high performance low ash, dispersant/detergent type gas engine oil formulated especially for four stroke landfill gas, biogas, digester gas and sour gas applications.

HDAX® 9200 Low Ash Gas Engine Oil is a premium performance, heavy-duty, low ash crankcase oil specifically designed to lubricate a wide range of four-stroke natural gas and dual-fuel engines where low ash oils are recommended.

GST® Advantage EP is formulated with VARTECH Technology which is advanced chemistry that helps:

• Improve oxidation stability
• Reduce oil degradation
• Extend oil life by limiting harmful precursors that can lead to varnish formation

VARTECH Technology inhibits varnish formation to help maintain peak performance, reliability and productivity

GST® Advantage RO is formulated with VARTECH Technology which is advanced chemistry that helps 'Improve oxidation stability', 'Reduce oil degradation', 'Extend oil life by limiting harmful precursors that can lead to varnish formation VARTECH Technology inhibits varnish formation to help maintain peak performance, reliability and productivity'.

GST® Oil is a premium performance inhibited turbine oil formulated from premium base oil technology and rust, oxidation and foam inhibitors.