Brake and Clutch Fluid DOT 4 is a high quality, non-petroleum automotive brake fluid designed for use in conventional hydraulic brake and clutch systems under normal service conditions.

Cetus®DE is a premium performance, synthetic compressor oil based on diester technology and containing an ashless inhibitor system, helping to provide protection against corrosion and outstanding oxidation resistance under severe operating conditions.

Cetus® PAO oil is a premium performance, synthetic compressor oil based on polyalphaolefin technology.

Cetus® PAG is a premium performance synthetic gas compressor lubricant formulated with Polyalkylene glycol and designed for use in enclosed pattern gas compressors where the crankcase and bearings operate in a hydrocarbon or chemical gas-filled atmosphere.

Compressor Oil EP VDL is a high performance, petroleum-based compressor oil specifically designed for severe operating conditions.

Havoline® Xtended Life Antifreeze/Coolant is a single phase, ethylene glycol antifreeze/coolant based on an aliphatic corrosion inhibitor system available as a concentrate, a premix 50/50 and a premix 55/45.

Delo® XLC Antifreeze/Coolant is a non-nitrited extended life Antifreeze/Coolant formulation for heavy duty and light duty diesel vehicles and equipment. Delo® XLC is formulated with an aliphatic corrosion inhibitor system available as a concentrate and a premix 50/50.

Delo® XLI Corrosion Inhibitor is a water based, low toxicity, environmentally friendly, nitrite free carboxylate inhibitor (OAT technology).

Delo® ELC Antifreeze/Coolant products are heavy duty engine coolants that uses organic corrosion inhibitor technology called aliphatic carboxylates. Delo® ELC is free of nitrates, borates, silicates, phosphates and amines. These products contain nitrites and molybdates for additional cylinder liner protection.

Havoline® XLI Concentrate is an environmentally sensitive, coolant and corrosion inhibitor concentrate based on extended-life organic acid Carboxylate Technology.

Starplex® EP 2 is a premium, multipurpose EP automotive wheel bearing and chassis grease containing an ISO 220 mineral base oil, a lithium complex thickener, EP additives, rust and oxidation inhibitors and tackiness additives.

Multifak® EP is a multipurpose EP grease containing highly refined mineral base oils, lithium thickener, extreme pressure (EP) additives and rust and oxidation inhibitors.

Multifak® EP 2 M3 is a dark grey, multipurpose EP grease primarily designed for construction, mining and agricultural equipment where an extra measure of protection in shock loading conditions is required.

Thermatex® EP is a nonmelting, EP grease formulated from a highly refined ISO 100 mineral base oil, an organoclay (bentonite) thickener, and an effective EP agent for high temperature applications where frequent re-application is available.

Starplex HD 2 M3 is a premium, multipurpose EP grease. It contains an ISO 460 base oil, lithium complex thickener, EP additives, rust and oxidation inhibitors, tackiness additives, and molybdenum disulfide.

Starplex HD 2 M5 contains a ISO 460 base oil, litihium complex thickener, extreme pressure additives, rust and oxidation inhibitors, tackiness additives, and 5% molybdenum disulfide.

Black Pearl SRI® 2 is a specially formulated grease containing a highly refined paraffinic base oil, synthetic polyurea ashless organic thickener and high performance rust and oxidation inhibitors, for the lubrication of anti-friction ball, needle and roller bearings operating at speeds up to and above 10,000 rpm, operating at higher temperatures, or where water or salt water may penetrate bearings.

Multifak® HM 2 is an efficient performance lithium grease, formulated with ISO 110 mineral base oils, combined with oxidation and corrosion inhibitors, and anti-wear additives.

Multifak® HM 2 is a multipurpose grease suitable for a wide spectrum of applications within a given temperature range.

Ultra-Duty® HD 2 is a premium, heavy-duty EP grease containing a high viscosity mineral oil, lithium thickener, effective EP additive, rust and oxidation inhibitors and tackiness agent.

Starplex® XD 1.5 M3 is a special grease formulated for severe applications that are subject to high temperatures, extreme pressure, shock loads and water wash out conditions. Its formulated with blend of heavy synthetic base oils and a shear stable Lithium Complex Soap.

Starplex Syn HD 1.5 is a high performance, high temperature industrial and automotive EP grease specially formulated from synthetic base oil, lithium complex thickener, EP additives, a tackiness agent and special corrosion and oxidation inhibitors

Texclad® XDS 00/000 is a high performance sprayable aluminium complex grease, formulated with mineral base stocks combined with a very fine graphite component designed to promote high pressure load protection.

Delo 400 SLK SAE 15W-40 with ISOSYN Advanced Technology is a premium quality “low-SAPS” heavy-duty diesel engine oil specifically designed using the latest generation additive technology to provide outstanding protection for on and off-highway applications and lubricate a wide range of highspeed diesel engines requiring API CK-4, CJ-4, CI-4 PLUS / SM, or ACEA E9 performance lubricants operating under the most severe service conditions.

Delo® 400 MGX SAE 15W-40 is an API CJ-4 heavy duty diesel engine oil specifically formulated for on-highway and off-highway applications using either High Sulfur or Low Sulfur Diesel and can also help provide protection for newer compliant low emission diesel engines with Selective Catalytic Reduction (SCR), Diesel Particulate Filter (DPF) and Exhaust Gas Recirculation(EGR). It is fully compatible with previous diesel engine models and previous API Oil Service Categories including API CI-4 PLUS, API CI-4 and API CH-4.

Delo® 600 ADF SAE 15W-40 with OmniMax is a premium, high performance, long drain, “ultra-low-Ash”, synthetic technology engine oil. It is recommended by Chevron for Tier IV Final & 2017 greenhouse gas - compliant (GHG 17) diesel engines with lower CO2 emissions and improved fuel economy fitted with Selective Catalytic Reduction (SCR), Diesel Particulate Filter (DPF) and Exhaust Gas Recirculation (EGR) systems as well as in Euro VI and off-highway EU Stage V naturally aspirated and turbocharged four-stroke diesel engines.

Delo® Silver SAE 30 is a monograde heavy-duty diesel engine oil designed to lubricate engines requiring API CF or SF performance lubricants. The level of alkaline reserve makes it suitable for use with high sulfur fuels at appropriate oil drain intervals.

Delo® 400 RDS is a High performance synthetic- blend “low-SAPS” diesel engine oil designed to meet current ACEA requirements and more challenging OEM specifications for Euro V and VI engines, especially where Diesel Particulate Filters (DPF) are fitted.

Delo® Gold Ultra S SAE 10W-40 is a high performance synthetic heavy-duty engine oil designed to conform to current ACEA requirements and the more challenging OEM specifications, including Scania LDF3 for latest technology Euro VI diesel engines.

Delo® Gold Ultra SAE 15W-40 is a high performance, multigrade, heavy-duty diesel engine oil specifically designed to lubricate a wide range of engines requiring API CI-4 or ACEA E7 performance lubricants, including those fitted Selective Catalytic Reduction (SCR) and / or Exhaust Gas Recirculation (EGR) emission control technologies.

Delo® 400 NG with ISOSYN® Technology is a premium CNG/LNG/LPG oil formulated to deliver outstanding protection and long drain performance in a wide variety of medium and heavy duty CNG/LNG/LPG-fuelled applications.  

Delo 400 XSP SAE 5W-30 with ISOSYN Advanced Technology is a super-premium quality “low SAPS” heavy duty diesel engine oil which exceeds industry and engine manufacturers’ performance requirements. It is specifically designed to lubricate a wide range of high speed diesel engines requiring API CK-4, CJ4 PLUS / SN, or ACEA E9 performance lubricants operating under the most severe service conditions.

Delo® 400 XLE SAE 10W-30 with ISOSYN® Advanced Technology is a high-performance synthetic “low-SAPS” (sulfated ash, phosphorus and sulfur) heavy-duty diesel engine oil which meets industry and engine manufacturers’ performance requirements. It is specifically designed to lubricate a wide range of high-speed diesel engines requiring API CK-4, CJ-4, CI-4 PLUS / SN, or ACEA E6 performance lubricants operating under the most severe service conditions with potential fuel economy benefits.

Delo® 400 SLK SAE 10W-40 with ISOSYN Advanced Technology is a premium quality “low-SAPS” heavy-duty diesel engine oil specifically designed to lubricate a wide range of high-speed diesel engines requiring API CK-4, CJ4, CI-4 PLUS or ACEA E9 performance lubricants operating under severe service conditions.

Delo® 400 SLK SAE 10W-30 with ISOSYN® Advanced Technology is a premium quality “low-SAPS” heavy-duty diesel engine oil specifically designed to lubricate a wide range of high speed diesel engines requiring API CK-4, CJ-4, CI-4 PLUS or ACEA E9 performance lubricants operating under the most severe service conditions.

1000 THF is a high quality, multifunctional tractor hydraulic fluid, specially formulated for use in transmissions, final drives, wet brakes, and hydraulic systems of tractors and other equipment employing a common fluid reservoir.

Rando® HD oils are formulated with premium Group II base oils and anti-wear additives, and are designed to give robust protection to hydraulic pumps in mobile and stationary systems.

Rando® HDZ is a premium quality, shear stable, multiviscosity, anti-wear hydraulic fluid, designed to give robust protection for hydraulic systems subjected to wide variations in ambient and operating temperatures.

Rando® WM 32 is a high performance multigrade hydraulic fluid designed for use in both wind turbine systems and a wide range of other applications where optimum protection is required under severe operating conditions.

TALCOR OGP-6 is an adhesive, open gear lubricant free of bitumen, graphite, molybdenum disulphide and other heavy metals. Highly refined base oils and stable synthetic thickeners compounded together with high performance enhancing additives, provides a transparent lubricant film on the gear flanks.

TALCOR OGP-4 is an advanced Open Gear Lubricant consisting of a solvent free blend of synthetic base fluids and hydro-treated mineral oils complexed with new micro ground lubricating solids and plastic-coupling chemical agents that form a thixotropic matrix.

VARTECH™ Industrial System Cleaner (ISC) is a deposit-cleaning product added directly to the oil in use during operation to clean a system of varnish and sludge before a scheduled oil change. VARTECH™ ISC helps prepare the system for optimum performance of a new, fresh oil charge.

TALCOR BREAKOUT BLUE is an anti-seize compound with a distinctive blue colour with its revolutionary technology, consisting of the new generation of stable antiweld fillers, highly refined, high viscosity base stocks bound with a high melt complex thickener.

Aries ® is a high performance lubricant for percussion-type air tools, which is formulated from highly refined mineral oils, extreme pressure, oiliness and tackiness additives, emulsifiers, rust and corrosion inhibitors, and anti-foam and anti-fogging agents.