Cement and Quarry
Fixed mixers, piling, crushing and milling equipment, cranes and hoists, conveyors and elevators, excavators, haulers, loaders and other earth-moving equipment demand the quality and protection Caltex lubricants delivers.
Heavy-duty motor oils
Delo® 400 MGX SAE 15W-40 is an API CJ-4 heavy duty diesel engine oil specifically formulated for on-highway and off-highway applications using either High Sulfur or Low Sulfur Diesel and can also provide protection for newer compliant low emission diesel engines with Selective Catalytic Reduction (SCR), Diesel Particulate Filter (DPF) and Exhaust Gas Recirculation (EGR). It is fully compatible with previous diesel engine models and previous API Oil Service Categories including API CI-4 PLUS, API CI-4 and API CH-4.
Delo® 400 Multigrade is a premium performance, multigrade, heavy-duty diesel engine oil specifically designed to lubricate a wide range of diesel engines requiring API CI-4 PLUS, CI-4, ACEA E7 or JASO DH-1 performance lubricants operating under the most severe service conditions.
Delo® Gold Ultra is a high performance, multigrade, heavy-duty diesel engine oil specifically designed to lubricate a wide range of engines requiring API CI-4 or ACEA E7 performance lubricants, including those fitted Selective Catalytic Reduction (SCR) and / or Exhaust Gas Recirculation (EGR) emission control technologies.
Enclosed gear lubricants
Delo® Gear EP-4 are multipurpose lubricants. They are made from paraffinic base stocks and contain a carefully balanced additive package to provide gear protection and long lubricant life. The sulfur-phosphorus extreme pressure additive technology used in Delo Gear EP-4 provides exceptional thermal and oxidation stability. In addition, this lubricant is fortified with rust and corrosion inhibitors, a foam inhibitor, and a pour point depressant. Avaiable in SAE 90 and 140.
Delo TorqForce are high performance lubricants designed for use in transmissions, final drives, and hydraulic systems requiring a fluid meeting Caterpillar TO-4 or Allison C-4 requirements. They are also recommended for transmission and hydraulic systems manufactured by Dana Powershift, Komatsu, Komatsu Dresser, Tremec/ TTC, Vickers and ZF.
Available in SAE grades 10W, 30, 50, 60